Backflow Repair

Do you have backflow?

Backflow is a plumbing problem that can cause significant damage to your home if not fixed immediately. It happens when water flows backward from the drain, usually caused by a clogged or slow-moving drain line.

It’s important to fix this issue as soon as possible because it will only get worse and potentially cause even more problems in the future.

The International Plumbing Code states that; “Backflow prevention is required for all fixtures, sprinkler systems, or more extensive water supply lines. Backflow prevention is also necessary for every irrigation system, water filter, and reverse osmosis system.”

This is why we highly recommend backflow repairs. Backflow is a serious issue and should be treated as such.

What Is Backflow Repair?

Backflow repair is the process of fixing issues with backflow and stopping it from occurring in your home. Backflow prevention is a safety measure that prevents wastewater or contaminants from flowing back into the main water supply.

Backflow can occur in several ways, such as cross-connections with other systems and the failure to put a backflow prevention device in.

Backflow is more likely to happen in older homes because of the lack of safety features, but it can also occur in newer homes if there is a cross-connection. Backflow can also occur when the water supply line freezes and expands, another reason to get a backflow repair.

Backflow Repair Warning Signs

Backflow is also known as Backflood or Backwash and can be identified by any of these warning signs.

• Water discoloration such as brown, yellow, or rust-colored water
• Foul smells coming from the tap or showerhead
• Low water pressure in toilets, sinks, or bathtubs
• Slow draining sinks and tubs
• You may be able to see rust particles or silt in the water if you look closely
• Water tastes or smells strange or off
• Backwater valves are leaking or have been removed from their location

Suppose you see any of these warning signs. In that case, it’s essential to call a backflow repair expert immediately, as they will be able to assess the situation and fix your backflow issue before it becomes a bigger problem. A backflow check will also ensure the safety and longevity of your home’s plumbing system.

Why Should I Get My Home Inspected for Backflow Problems?

Getting Backflow repairs done in your home will help you avoid a major plumbing problem.

The first thing to remember is that it’s against the law for any plumbing system to have an open pipe.

The second thing to remember is that backflow problems can spread diseases, effectively creating a biological hazard that needs to be stopped immediately before further contamination occurs. That’s where your home inspector comes in handy.

They’ll look at the plumbing fixtures, verify that the pipes are pitched correctly and that corrosion does not compromise joints or connections.

Inspectors also check for leaks from outdoor hoses, dripping faucets, water pressure, water conservation measures, or anything that might cause a problem that needs repairs. Now, for this specifically, an inspector will note drainage problems, backflow issues, or cross-connections.

Most importantly, these inspectors will check backwater valves that are required by law in most areas, mainly if your home uses city water or other systems that are connected to the mainline. These backwater valves are crucial because they prevent contamination.

Most people don’t think about backflow, but it’s important to remember that backflow can happen at any time without warning.

The Consequences of Not Fixing a Backflow Problem in Your Home

Not only is backflow a severe problem that’s against the law, but it can also lead to disease or even death.

Below are some of the most significant consequences of a backflow issue:

• Unsafe drinking water supply: Backflow can cause contaminated water to flow into your home. This might cause illness and disease in your family, affecting the water quality you use for drinking and cooking.
• Damage to your plumbing system: This happens when water is leaking into it or draining slowly. Backwater valves can also become corroded and damaged.
• High utility bills: Backflow issues can also cause pressure loss, resulting in high utility bills for heating or cooling costs. This is because the water cannot be used as intended and requires extra energy to push it through your home’s piping system and into its proper location.
• Deteriorated property value: Backflow issues can be messy and unsightly. Seeing rusty brown water coming from your faucets or toilets can be very off-putting.
• Burst pipes: Backwater valves are designed to prevent water from flowing back into the city system. Backflow can cause your home’s plumbing pipes pressure to become too high to handle. This can cause pipes to explode and leak, wasting water and causing costly damage.
• Potential property damage from flooding: Backwater valves can also become stuck open. If this happens, it can result in massive flooding and damage to your property. Backwater valves are designed to remain closed, but sometimes they need replacing, saving you money.

How To Get Help

Are you looking for a reliable backflow repair company in Atlanta?

If your water is flowing backward, it’s time to contact Southside Atlanta Backflow Repair. We are the experts when it comes to finding and fixing leaks in your system.

Southside Atlanta Backflow Repair is fully licensed and insured, so you can rest easy knowing that we will take care of everything from start to finish. Our team of highly trained technicians will find the problem quickly and fix it right away so that you can have peace of mind knowing that there won’t be any more problems.

If you need help with your backflow or if you want to schedule an appointment, click here! We’ll be happy to answer any questions that you may have about our services or how we can help fix your problem fast!

Don’t wait another day. Pick up the phone and call us at (404) 671-4945 now, and we’ll take care of everything else from there!